; Some performance tunings
socket = l:TCP_NODELAY=1
socket = r:TCP_NODELAY=1
TIMEOUTclose=0
options = DONT_INSERT_EMPTY_FRAGMENTS
[https-vip]
accept = <ip1>:443
connect = 127.0.0.1:8443
;engineId = capi
cert = C:\Program Files (x86)\stunnel\bin\c4.pem
key = C:\Program Files (x86)\stunnel\bin\c4.key
;configure ciphers as per your requirement and client support.
;this should work for most:
ciphers = TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!3DES
[acts]
; accept = ACTS IP:443
accept = <ip1>:1443
; When stunnel is on the same box, simply leave the below IP address as 127.0.0.1
connect = 127.0.0.1:9002
; Certificate information for Connect Meetings.
; This assumes you put the cert and key in the root folder of stunnel
cert = C:\Program Files (x86)\stunnel\bin\c5.pem
key = C:\Program Files (x86)\stunnel\bin\c5.key
; ciphers = ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH
ciphers = ALL:!AECDH:!ADH:!LOW:!EXP:!MD5:@STRENGTH
[rtmps-vip]
; incoming vip for fms (to secure Meeting)
accept = <ip2> :443
; ip of the fms server
; Send unencrypted request to 1935
connect =127.0.0.1:1935
; Certificate information for Acrobat Connect Meetings.
cert = C:\Program Files (x86)\stunnel\bin\c6.pem
key = C:\Program Files (x86)\stunnel\bin\c6.key
above code is all of stunnle.conf and when i start stunnle it shows this error :
<accept ip in rtmps> Can't assign requested address (WSAEADDRNOTAVAIL) (10049)
; Protocol version (all, SSLv2, SSLv3, TLSv1)
sslVersion = all
options = NO_SSLv2
options = NO_SSLv3
options = DONT_INSERT_EMPTY_FRAGMENTS
options = CIPHER_SERVER_PREFERENCE
renegotiation=no
fips = no
;Some performance tunings
socket = l:TCP_NODELAY=1
socket = r:TCP_NODELAY=1
TIMEOUTclose=0
; meeting SSL / RTMPS
[rtmps-vip]
accept = {yourServerIP}:443
connect = 127.0.0.1:1935
cert = C:\Connect\stunnel\certs\public_certificate_meeting-server.pem
key = C:\Connect\stunnel\certs\private_key_meeting-server.key
When you run the Stunnel application, does it start up and say it's working? Do you have the AMS server set to use a different IP than the application server?
]]>and i add this code to stunnel.conf
[rtmps-vip]
; incoming vip for fms (to secure Meeting)
accept = my server ip:443
; ip of the fms server
; Send unencrypted request to 1935
connect =127.0.0.1:1935
; Certificate information for Acrobat Connect Meetings.
cert = C:\Program Files (x86)\stunnel\bin\c6.pem
key = C:\Program Files (x86)\stunnel\bin\c6.key
please help me.
thanks in advanced